How to use 3M adhesive film to achieve the best results?

1, the first adhesive surfaces must be cleaned and dried, is generally recommended to cloth dampened with 1:1 IPA (isopropyl alcohol) mixture of water and wipe the surface clean post until the surface is completely dry.
2, the solvent is dried to be cleaned, the 3M adhesive tape bonded to the surface of the drum or otherwise subjected to about 15PSI (1.05 kg / cm) of the pressure to an effective bond.
3, the 3M tape peel release paper and then pasted materials will need to fit, also impose 15PSI pressure to effectively fit. For removal of air bubbles, the pressure should be increased to a ceiling limit of items can withstand.
4, the ideal temperature is pasted 15-38 ℃, do not lower than 10 ℃.
5, when the adhesive tape should be fit after the end of the first, then slowly push to the other side, in order to reduce the probability of bubbles generated.
Appropriate environmental requirements 3M tape storage: temperature of 19-23 ℃, humidity of 40-60%.